WYKAMOL MOULD ERADICATION KIT

How to Use the Wykamol Mould Eradication Kit

• Put on the safety goggles and protective gloves before commencing.
• Spray the affected surface with mould remover biocide from a distance of between three and five centimetres. Note that, as well as spraying the visible mould, you should extend the treatment one metre beyond it for full effectiveness. If the area is particularly badly affected, a second coat of spray should be applied after ten minutes have elapsed.
• If you are spraying onto paper, the formula will act as an effective stripping agent. The paper contaminated with mould should be stripped and securely bagged before being removed from the property. After this, the exposed plaster should be resprayed with the biocide solution. 
• Once the surface has fully dried, scrape away any loose, flaking plaster. Note that previously painted surfaces must be etched using sandpaper. 
• Using the provided sponge, rub down the area thoroughly. Leave for 30 minutes to allow to product to work. Then, rinse the surface using warm, soapy water. 
• The specialist paint additive, which helps to prevent recurrence of mould outbreaks, should then be used. It can be mixed into primer, undercoat, varnish, emulsion paint, gloss paint, textured paint, tile adhesive or wallpaper paste. Follow the provided instructions for the amount of additive to mix into these different substances. Blend for at least one minute or until the additive is fully dispersed. Apply the mixture as usual.